# Applying IBC and Local Codes during Development Ex B question 2 **URL:** https://community.blackspectacles.com/t/applying-ibc-and-local-codes-during-development-ex-b-question-2/7737 **Category:** Programming & Analysis **Tags:** real-world-practice **Created:** [March 3, 2026, 7:21pm UTC](https://community.blackspectacles.com/t/applying-ibc-and-local-codes-during-development-ex-b-question-2/7737 "2026-03-03T19:21:40Z") **Posts on this page:** 2 **Page:** 1
### Author: ![iaa413](https://blackspectacles.com/uploads/images/6.png) [@iaa413](https://community.blackspectacles.com/u/iaa413) #### Post date: [March 3, 2026, 7:21pm UTC](https://community.blackspectacles.com/t/applying-ibc-and-local-codes-during-development-ex-b-question-2/7737/1 "2026-03-03T19:21:40Z")
![image](https://canada1.discourse-cdn.com/flex029/uploads/blackspectacles/original/2X/5/53e13b2fcbd018d6f294c058ab7d92740cb8f5e3.png) The above is correct if you actually go through all the parcels and extract the information and sum up the lot square footages. However, you also provide the information below Site Area combined. And if you use this Square footage it is incorrect information. So should you fix this problem, and not misled. ![image](https://canada1.discourse-cdn.com/flex029/uploads/blackspectacles/original/2X/7/709c6306518f156eb603afa1a145ca042ba1cde5.png) ---
### Author: ![iaa413](https://blackspectacles.com/uploads/images/6.png) [@iaa413](https://community.blackspectacles.com/u/iaa413) #### Post date: [March 3, 2026, 7:32pm UTC](https://community.blackspectacles.com/t/applying-ibc-and-local-codes-during-development-ex-b-question-2/7737/2 "2026-03-03T19:32:45Z")
![image](https://canada1.discourse-cdn.com/flex029/uploads/blackspectacles/original/2X/8/8b83c9f9120a8c1fc2ba1c0c505f6c0c939f2e20.png) In question 3, the question is referred back to the 45,780 sf to get the right answer, but you do not use the sum of the lots in Q2 46,768 sf. You re flip-flopping information.