# DewPoint Calculation within the wall Assembly

**URL:** <https://community.blackspectacles.com/t/dewpoint-calculation-within-the-wall-assembly/3087>\
**Category:** Project Development & Documentation\
**Tags:** help\
**Created:** [May 24, 2021, 2:13am UTC](https://community.blackspectacles.com/t/dewpoint-calculation-within-the-wall-assembly/3087 "2021-05-24T02:13:44Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![coachdarionziegler](https://yyz1.discourse-cdn.com/flex029/user_avatar/community.blackspectacles.com/coachdarionziegler/32/1272_2.png) [@coachdarionziegler](https://community.blackspectacles.com/u/coachdarionziegler)\
**Post date:** [May 24, 2021, 5:14pm UTC](https://community.blackspectacles.com/t/dewpoint-calculation-within-the-wall-assembly/3087/3 "2021-05-24T17:14:22Z")

</div>

Hi @najia.hashim ,

There was also a similar question posted awhile back that might be helpful to you! Check it out at the link below.

> [@Vapor Barrier Location](https://community.blackspectacles.com/t/vapor-barrier-location/2329):
>
> If the VB is located on the warm side in cold and hot climates, where do you put the VB in temperate climates?

-Darion

---

_[View the full topic](https://community.blackspectacles.com/t/dewpoint-calculation-within-the-wall-assembly/3087)._